![]() ![]() If you have located the damage, then remove it and reconnect it. The person who installed the GPS tracker device in your car might have damaged the wires. It would help if you connected all the wires back together. Now that you have successfully removed the device from the vehicle, you need to reconnect all the ignition wires and put back the components in their original place. You need to disconnect the antennas at the receiver and pull the GPS antenna. It is not tough to remove the components. Now is the time to remove the cable from your car battery. It is also possible that there are two relay wires to the ignition.There can be wires in the vehicle ground.One of the wires can be the red wire on the ignition so that the device keeps receiving the power and the battery keeps getting charged.The next one could be the GSM antenna, next to the GPS antenna.You can follow the wire to the top of your car and remove it the same. One of the wires could be the GPS antenna.If you are not careful, you will end up damaging the thin wires of the car. Now, remove the electrical tape and zips from the area, but we are wary not to break the thin wires.Then, you may see a plastic device with a suitable thickness with two wires connecting the same to the ignition wires.Check for the wires that go to the roof of the car.Also, look for the wires that are different in thickness or color compared to the ones already there.Find any new wiring or additional electrical tape.Open the underside of your dash and find if something is out of place.But if you suspect foul play, you first need to locate the device in your car. Well, if you installed it, you know where it is. So let us see how you can uninstall a hardwired GPs tracker without damaging your car and the tracking device. Removing portable or plug-and-play trackers is easy. We have already discussed the various types of GPS trackers for cars and how you can install or uninstall them. How to remove the GPS tracker from the car? They will ensure that the tracker is uninstalled properly and is viable for further use. If you want to remove a hardwired GPS tracker from a car, the best option is to ask your local auto repair mechanic to help you out. They are safely hidden inside the car, making them inaccessible.They connect to the engine battery and do not require recharging.Most people prefer hardwired GPS trackers over others for two main reasons – A wired GPS tracker also enables you to remotely disable the car’s ignition if it senses a security violation, which does not happen in the case of plug-in devices. However, the wired tracking devices operate using a battery and antenna, through which they can send alerts when any tampering occurs. And because of this reason, it is difficult to tamper or manipulate them. These are difficult to install and remove and need expert help. Hardwired GPS TrackerĪs the name suggests, hardwired GPS trackers are directly wired in the system and derive power from the engine. When the same is unplugged, it sends an alert to the owner. Also, the devices have an internal antenna and battery to keep sending the signals. The plug-and-play devices work when plugged in the car and not when it disconnects. Once you plug it in and activate it through the companion app, you are all set to start tracking.Īs far as removing these GPS trackers is concerned, you need to locate them unplug the device. Using the same, you can reposition the GPS tracking and position it to a safer location like the vehicle’s dashboard. So, there are OBD extension cables available. Plugging in a GPS tracker closer to the pedals can make driving uncomfortable. Sometimes the OBD ports are located under the car’s dashboard, where the driver positions their legs. That’s why the Plug-in GPS tracking devices also offer diagnostic reports along with location tracking. Mechanics and service technicians also use this port to run diagnostic codes. It uses a small tracking device that plugs directly into the OBD II port, located under the steering wheel of your car. Plug-in tracking is a premium GPS Plug-in vehicle tracking system. So, if you need to find a discreet magnetic GPS tracker, ensure to double-check all the metallic surfaces – inside and outside – of a car. ![]() ![]() The best places to install such trackers are under the car or inside the wheel well. You need to remove them from the surface. You have to place it on a metallic surface, and done! Similarly, uninstalling these trackers is also straightforward. They have in-built magnets or come with a separate magnetic case. Magnetic trackers are one of the best GPS devices and are easy to use. Here, we take you through different types of GPS trackers and how you can remove them from your vehicle. Upgrade your car security with Family1st Portable GPS tracker.How to remove the GPS tracker from the car?. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |